SPECIFICATIONS
*For use at lower temperatures, use the built-in tap water cooling or use model TC-351 Cooler for control to -20 ° C.
**Tap water connection required.
FOR TEMPERATURES HIGHER THAN 80 ° C PLEASE CONTACT BROOKFIELD FOR FLUID RECOMMENDATIONS.
Note: Specify voltage and frequency when ordering.
†Low temperature limit 10°C above ambient unless external cooling is used.
†† Temperature stability may vary depending on bath volume, surface area, insulation and type of fluid.
| TC-150 Bath | |||||
| MODEL | Temperature Range Low | Temperature Range High | Controller | Cooling | Temperature Stability †† |
| TC-150AP* | Ambient +10° † | +200 ° C | AP | Tap Water** | 0.01 ° C |
| TC-150SD* | Ambient +10° † | +150 ° C | SD | Tap Water** | 0.05 ° C |
| TC-150MX* | Ambient +10° † | +135°C | MX | Tap Water** | 0.07°C |
| TC-150 Bath | |||||||
| MODEL | Digital Type Resolution (Set / Read) | Reservoir Capacity | Pump Speed | Flow Rate | Internal Work Area DxWxH (inches) | Overall Dimensions DxWxH (inches) | Weight (Gross) |
| TC-150AP* | 0.01 / 0.001 | 6 liters | Variable | 16 LPM | 4.5 x 4.0 x 6.0 | 13.4 x 8.1 x 14.9 | 26 lbs |
| TC-150SD* | 0.1 / 0.1 | 6 liters | 2-speed | 11 LPM | 4.5 x 4.0 x 6.0 | 13.4 x 8.1 x 14.9 | 26 lbs |
| TC-150MX* | 0.1 / 0.1 | 6 liters | 1-speed | 12 LPM | 4.5 x 4.0 x 6.0 | 13.4 x 8.1 x 16.0 | 20 lbs |
**Tap water connection required.
FOR TEMPERATURES HIGHER THAN 80 ° C PLEASE CONTACT BROOKFIELD FOR FLUID RECOMMENDATIONS.
Note: Specify voltage and frequency when ordering.
†Low temperature limit 10°C above ambient unless external cooling is used.
†† Temperature stability may vary depending on bath volume, surface area, insulation and type of fluid.
