Specifications are subject to change without prior notice.
Test work pieces | Hardness units | |||||
HRC | HRB | HRA | HB | HV | HS | |
Steel/cast steel: | 20 - 68 | 60 - 100 | 59 - 86 | 80 - 650 | 80 - 940 | 32 - 100 |
Tool steel: | 20 - 68 | - | - | - | 80 - 940 | - |
High-grade steel: | 20 - 62 | 46 - 100 | - | 80 - 650 | 80 - 800 | - |
Cast iron: | - | - | - | 90 - 380 | - | - |
Spheroidal graphite iron: | - | - | - | 90 - 380 | - | - |
Aluminium cast alloys: | - | - | - | 20 - 160 | - | - |
Brass: | - | 13 - 95 | - | 14 - 170 | - | - |
Bronze: | - | - | - | 60 - 290 | - | - |
Copper: | - | - | - | 45 - 315 | - | - |
The ranges correspond to the limits applied in static test methods.
Screen: | Graphic LCD 128 x 64 pixels with backlight |
Backlight modes: | Off-On Automatic Large digits for measured value in selected unit (11 mm hight) Always showed the measured value in Leeb units plus the measured value in the selected unit |
Languages: | English, Spanish, German, Italien, French, Portuguese, (more languages can be incorporated by order) |
Impact device: | Type D |
Precision: | ± 0,5 (refered to L=800 ± 4 HL) according ASTM A956-02 |
Datalogger + Statistics: | Storage of 2000 data, Date and hour record Histogramm viewing of data groups |
Statistic values: | Average, Minimum, Maximum, Range |
Alarms: | Minimum and maximum programmable |
Angular corrections: | Manual and Automatic |
Autonomy: | 120 hours (with alkaline batteries without backlight) |
Auto-Off: | Programmable from 4 to 30 minutes |
Data Output: | Serial to a PC |
Dimensions (L x W x H): | 122 x 65 x 22 mm |
Weight: | 160gr with batteries |
Power supply: | By two alkaline batteries AA |