HỆ THỐNG SẮC KÝ LỎNG ĐIỀU CHẾ ĐẲNG DÒNG ECS11

HỆ THỐNG SẮC KÝ LỎNG ĐIỀU CHẾ ĐẲNG DÒNG ECS11

  • 5704
  • ECOM - Cộng Hoà Séc
  • Liên hệ
Hệ thống sắc ký điều chế hiệu năng cao chứa máy dò UV DAD, bơm điều chế và hộp đựng chai. Máy dò cho phép đo ở bốn bước sóng cùng một lúc hoặc quét thông tin.
Giao tiếp thông qua RS232 hoặc Ethernet (LAN). Không cần thêm thẻ chuyển đổi A / D PC cho hệ thống này.

Hệ thống sắc ký lỏng điều chế đẳng cấp ECS11
 
Hệ thống sắc ký điều chế hiệu năng cao chứa máy dò UV DAD, bơm điều chế và hộp đựng chai. Máy dò cho phép đo ở bốn bước sóng cùng một lúc hoặc quét thông tin.
Giao tiếp thông qua RS232 hoặc Ethernet (LAN). Không cần thêm thẻ chuyển đổi A / D PC cho hệ thống này.
Hệ thống chứa phần mềm thủ công và phần mềm ECOMAC bao gồm trình điều khiển cho tất cả các đơn vị ECOM.
 
Phần chính
 
ĐẦU DÒ  TOY14DAD 400
là một máy dò mảng diode UV, cho phép đo độ hấp thụ của bốn bước sóng trong phạm vi 200 - 400nm đồng thời trong một tế bào giống như trực quan hóa toàn bộ quang phổ. Có thể sử dụng máy dò trong các ứng dụng flash và điều chế. Tiêu chuẩn được lắp ráp tế bào chuẩn bị PLCC 15 nhưng các tế bào khác có sẵn.
 
BƠM ĐIỀU CHẾ ECP2100
Máy bơm đẳng cấp này hoạt động với phạm vi tốc độ dòng chảy 0,1-100 ml / phút và áp suất lên đến 30 MPa. Phần mềm đơn vị bao gồm thuật toán học tập mới để triệt tiêu xung và nhiều chức năng kiểm tra và chẩn đoán.
 
HỘP ECB2006 CHO CÁC CHAI CHỨA PHA ĐỘNG
Hộp phù hợp để lắp đặt chai pha di động an toàn trên các hệ thống đẳng cấp
 
PHẦN MỀM ECOMAC CHROMATOGRAPHY
Hệ thống này được kiểm soát hoàn toàn bởi phần mềm ECOMAC, đây cũng là một phần của giao hàng. Nó cho phép tất cả các đơn vị kiểm soát, tạo gradient và thu thập phân số. (Bộ sưu tập phân số có thể được cung cấp dưới dạng tùy chọn)

Tập tin PDF:

Sản phẩm cùng loại

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.
Liên hệ

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required
Liên hệ

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.
Liên hệ

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.
Liên hệ

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.
Liên hệ

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.
Liên hệ

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.
Liên hệ