Máy Đo Độ Bền Kéo X250

Máy Đo Độ Bền Kéo X250

  • 7478
  • Testometric - Anh Quốc
  • Liên hệ
Máy thử nghiệm đa năng gắn bàn, cột đơn với điều khiển máy tính hoàn toàn và hệ thống điều khiển servo AC chính xác. Vận hành tốc độ cao cho việc thử nghiệm vật liệu hiệu quả lên đến 3kN.
Phần mềm máy
Tất cả các máy đều đi kèm với gói phần mềm WinTest-Analysis EC toàn diện của chúng tôi, cho phép điều khiển hoàn toàn qua PC và khả năng tạo và lưu trữ các quy trình thử nghiệm phức tạp.

Được làm theo số đo

  • Hệ thống thử nghiệm kỹ thuật số hoàn toàn với kiểm soát và độ chính xác cao, bao gồm điều khiển tự động qua máy tính cho các phương pháp thử, mang lại sự đơn giản trong vận hành.

  • Các load cells độ phân giải cao với độ chính xác tốt hơn +/-0.5% xuống đến 1/1000 dung lượng của load cells.
  • Nhận dạng tự động load cells và bộ mở rộng, với khả năng lưu trữ tham số hiệu chuẩn trên thiết bị.
  • Chức năng kiểm tra hiệu chuẩn phần mềm cho phép xác minh ngay lập tức độ chính xác của máy.
  • Khả năng quá tải 800% của load cells mà không bị hư hại.
  • Vít bi tự làm sạch đã được tải sẵn hiệu quả cao cho phép thử nghiệm nhanh chóng, êm ái. Được trang bị vòng bi đầu cuối bôi trơn kín suốt đời.
  • Hệ thống hướng dẫn chéo cung cấp khả năng căn chỉnh chính xác và vận hành mượt mà.
  • Kiểm soát chéo chính xác qua điều khiển servo AC kỹ thuật số và động cơ servo không chổi than, cho phép vận hành không cần bảo trì và điều khiển vị trí 23-bit.
  • Hệ thống thu thập dữ liệu tốc độ cao cho tối đa 4 kênh đồng bộ.
  • Hệ thống dẫn cáp load cells tích hợp trong cột máy giúp loại bỏ sự vướng víu và ngăn ngừa hư hại cáp.
  • 6 kênh I/O cho các thiết bị bổ sung như bộ mở rộng, micromet, thước kẹp, cân, v.v.
  • Khung tải có độ cứng cao với các đầu chéo thép chuyên dụng vững chắc và các cột hỗ trợ đùn cứng có các rãnh T để gắn phụ kiện.
  • Bảo vệ quá tải, quá hành trình và tác động.
  • Vỏ kính tiềm ẩn cung cấp thêm sự bảo vệ cho vít bi khỏi bụi và mảnh vụn trong quá trình thử nghiệm.
  • Thiết kế nhỏ gọn, tiết kiệm không gian bàn làm việc và mặt sàn.
  • Dải rộng các bộ kẹp và thiết bị cố định cho thử nghiệm kéo, nén, uốn, cắt, bóc và kiểm tra sản phẩm, v.v.
  • Dải rộng các bộ mở rộng tiếp xúc và không tiếp xúc có sẵn, bao gồm các mẫu laser và video.

Product Datasheet

Tập tin PDF:

Sản phẩm cùng loại

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.
Liên hệ

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required
Liên hệ

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.
Liên hệ

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.
Liên hệ

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.
Liên hệ

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.
Liên hệ

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.
Liên hệ