Máy kiểm tra đa năng đồ nội thất điều khiển PLC GT-LA10D Furniture Universal Testing Machine PLC control

Lượt xem:
188
Thương hiệu:
Gester - Trung Quốc
Giá:
Liên hệ

Máy kiểm tra đồ nội thất này được sử dụng để kiểm tra các đặc tính cơ học của bàn, ghế, giường, cũi và ghế. Có thể thực hiện tải trọng tĩnh ngang, tải trọng tĩnh dọc, thử nghiệm va đập và thử nghiệm độ bền.

Furniture Universal Testing Machine PLC control GT-LA10D

Product Introduction

Application:

This Furniture tester is used for testing the mechanical properties of tables, desks, beds, crib and chairs. Can perform the horizontal static load, vertical static load, impact test and durability test.

Feature:

1. The Furniture Testing Machine adopts frame structure design. The frame is made of high quality industrial aluminum, beautiful and generous.

2.Up to 8 sets of loading cylinder installed, 5 sets in horizontal cylinders on each of the four sides, 2 sets of vertical cylinder and 1set of impact cylinder on top frame. All cylinders can be adjusted up and down, frontward and backward to cover all mounting surfaces. The 8 sets of cylinders can execute joint or independent operation.

3. The bottom fixed block is free to adjust the position to accommodate different specifications of the sample.

4. PLC +15 inch color touch screen to control the actions of the machine; the operation is intuitive and simple.

5. GESTER independent research and development unique design, adopting SMC electrical proportional valve control+cylinder drive mode way to greatly meet the international standards of force accuracy and test speed double requirements; high precision force sensor sense the force value immediately; each load group adjusts the control individually; the loading force is stable and reliable.

6. Removable loading pad, can easily change the different loading pad to meet the different test requirements.

Furniture Universal Testing Machine Key Specifications

Control mode	PLC control
The Max. length of specimen	3m
Force sensor	2.5KN
Control mode	PLC+ Touch screen +GESTER system
Driving method	AIRTAC cylinder: 8 pcs SMC electrical proportional valve 7pcs
Air supply	≥0.6Mpa
Power supply	AC 220V 50HZ/60HZ
Machine dimensions	5980 × 5680 x 3940mm (L×W×H)
Machine weights	3000KG

Standards

Tables & Desks&Storage Units

EN1730-2012 Section 6.2, 6.3, 6.4,6.5, 6.6, 7.2, 7.3 ,

BS EN 15372-2016 Test1, Test2, Test3, Test5, Test6, Test8, Test10,

AS NZS 4610.3-1999 Annex B,D,E,G,N,P,R

AS NZS 4442-1997 Annex A,B,H,J

EN527-3, EN581-3,

GB/T 10357.1,

ISO 7170 Section 6.2.2, 6.4.1,7.5.2

BS4875-7（corresponding with ISO7170)

Chairs& Stool

EN 1728-2012 Section 6.4, 6.5, 6.7, 6.12, 6.15, 6.16, 6.17, 6.24, 7.3, 7.4, 7.9, 8.2, 8.4.1,8.5 , 8.8

EN581-2-2015 （corresponding with EN1728-2012),

EN1335-3 -2009 Section 7.2.1, 7.2.2, 7.3.1

EN 1729-2-2012 Section 5.3.2, 5.3.3, 5.3.5, 5.3.6, 5.3.7

EN 16139-2013 （corresponding with EN1728-2012)

ISO 7173-1989 Section 7.1, 7.2, 7.3, 7.5, 7.6, 7.7, 7.8, 7.10

BS5459-2-2000 Section A5.1 5.2

BS5459-2-2000 Section A5.2,

GB/T 10357.3 -2013 Section 4.3, 6.4,4.7,4.8,4.10,4.11,6.9

Bed

EN 1725-2023 Section 6.6 TEST 1,2,3,4,5,6,7,8,12

EN 747-2 Section 5.4,5.5,5.6.1,5.7,5.8

ISO198833-2018Section 6.2,6.3.1,6.3.2,6.4.1,6.4.2,6.4.3,6.5.1,6.5.2, 6.6

Accessories

Standard Accessories	5 sets	Horizontal loading device
	2 sets	Vertical loading device
	1 set	Impactor Device
	2 pcs	GT-LB01-2 Seat loading pad
	2 pcs	GT-LB01-3 Smaller seat loading pad
	2 pcs	GT-LB01-4 Back loading pad
	7 pcs	GT-LB01-5 Local loading pad
	1 set	GT-LB01-6 Seat Impactor Device
	1 set(350Lbs)	GT-LB01-11 BIFMA Bag Type Impactor device
	7pcs	Force sensor
	7pcs	Electric proportional valve
	1 set	Motor
	8pcs	Stoppers
Optional Accessories	1 set	GT-LB01-1A Loading point template
	1 set	GT-LB01-7 Impact hammer
	2 sets	GT-LA25 Bunk Bed Test Mass
	4 pcs	75mm*75mm Loading pad
	1set	100kg Disc superimposed weight
	1pc	Φ300MM Loading pad
	1pc	Φ400MM Loading pad
	1set	GT-MA12B Air Compressor

Tập tin PDF:

Sản phẩm cùng loại