Máy lấy mẫu xe tải nguyên liệu thức ăn chăn nuôi Truck Sampler G2 / G3 / G4

Máy lấy mẫu xe tải nguyên liệu thức ăn chăn nuôi Truck Sampler G2 / G3 / G4

  • 2258
  • Erkaya
  • Liên hệ
Máy lấy mẫu ngũ cốc khí nén là một thiết bị lấy mẫu công nghiệp dùng cho nhiều loại vật liệu khác nhau, bao gồm lúa mì, lúa mạch, ngô, viên nén, vụn, mảnh, hạt và bột.

General Specifications

  • The pneumatic grain sampler is an industrial sampler for a wide variety of materials, including wheat, barley, corn, pellets, chips, flakes, granules and powders
  • It provides representative and repeatable samples form ships, rail cars, trucks, tubs, bulk-bags or other vessels
  • Sample probe is mounted on the swivel stand and boom which are powdered in three axes
  • The system can operate in 2 different modes which are automatic and manual mode
  • Pressure sensor adjustment at bottom of the truck
  • Vacuum is provided by a functional blower (3 kw)
  • Telemecanique PLC provides ease of use
  • Remote control is optional
  • In the manual mode, it is possible to choose the depth where you can start sampling
  • The grain amount which system takes depends on density and moisture
  • The system can move 120º right to left and 120º left to right (totally 240º)
  • It can move upwards and downwards
  • The probe strand has 240 cm length and by means of telescopic arms it is possible to extend it up to 500 cm
  • The probe has length of 220 cm
  • High performance vacuum system can take sample from different depths and transfer to the collector in laboratory

Tập tin PDF:

Tập tin PDF:

Sản phẩm cùng loại

Hãng sx: RAPID (Labortex)

Dòng nhiệt kế phòng thí nghiệm với vùng hồng ngoại thích hợp để tạo công thức thuốc nhuộm và cho công việc nghiên cứu.
Liên hệ

Hãng sx: RAPID (Labortex)

Máy nhiệt luyện phòng thí nghiệm model PT-V là máy nhuộm liên tục phòng thí nghiệm loại vải Guide Cloth. Thích hợp cho vải chạy dài.
Liên hệ

Hãng sx: RAPID (Labortex)

Horizontal type model P-BO is suitable for all dyeing, printing, finishing, padding processes. Floor model, basic design as vertical type model P-AO.
Liên hệ

Hãng sx: RAPID (Labortex)

The basic principle is to have a continuous type laboratory machine which exactly has the same characteristics like a production STENTER machine to replicate testing results, suitable for drying, thermosoling and curing samples. P-TENTER consists of the following parts: - 1 pair of vertical type pneumatic mangle, model P-A1 - 1 hot-air dryer with pin-chain transportation system, model MINI-TENTER - 1 fabric pin-up device
Liên hệ

Hãng sx: RAPID (Labortex)

The basic principle of PMT-350 machine was to have a laboratory machine which has exactly the same possibilities and characteristics like a production STENTER machine. PMT-350 is a continuous operation apparatus suitable for drying, curing, continuous dyeing of sample.
Liên hệ

MSP

Hãng sx: RAPID (Labortex)

Model MSP, hoạt động liên tục để hấp vải in hoặc sau khi xử lý vải nhuộm trong hơi nước bão hòa lên đến 102℃±2℃. * Tất cả đều làm bằng thép không gỉ * Kích thước mẫu: Rộng tối đa 300mm (model MSP-300) Rộng tối đa 600mm (model MSP-600) Không giới hạn chiều dài. * Thời gian lưu trong buồng hơi: 3-18 phút (tốc độ khác theo yêu cầu) * Tùy chọn hơi nước nhiệt độ cao trong buồng bằng bộ điều khiển nhiệt độ và thiết kế gia nhiệt bằng điện.
Liên hệ

Hãng sx: RAPID (Labortex)

ROBOT DOSER là hệ thống định lượng phòng thí nghiệm thiết kế không ống để có độ chính xác tối ưu trong quá trình chuẩn bị bể nhuộm.
Liên hệ

Hãng sx: RAPID (Labortex)

AUSTOCK Pro replaces traditional labor intensive method of preparing stock solution standards. At the time of solution making, there is no need to add a specified amount of dyestuff, AUSTOCK Pro can automatically adjust the total solution volume according to the amount of dye added to achieve the correct concentration. As AUSTOCK PRO is computer controlled, the degree of accuracy achieved is without parallel.
Liên hệ

Hãng sx: RAPID (Labortex)

"TỦ NHUỘM", thiết kế dạng sàn có ngăn kéo tích hợp, được sử dụng để lưu trữ tất cả các loại thuốc nhuộm trong phòng thí nghiệm. có thể kết hợp với "Hệ thống định lượng phòng thí nghiệm, EZ DOSER" của chúng tôi để tránh người vận hành lấy nhầm thuốc nhuộm khi pha chế dung dịch gốc.
Liên hệ

Hãng sx: RAPID (Labortex)

EZ DOSER (thiết kế ba trong một), hệ thống định lượng phòng thí nghiệm mới nhất, nguyên lý hoạt động của việc phân phối công thức dựa trên phép đo thể tích bằng cách sử dụng một ống nhỏ giọt robot tiên tiến, bên cạnh việc phân phối công thức, sản phẩm này còn tích hợp với hệ thống pha chế và khuấy dung dịch gốc, mỗi chức năng có thể hoạt động độc lập và chính xác. EZ DOSER là một thiết bị không thể thiếu trong phòng thí nghiệm nhuộm để tăng khả năng tái tạo của nhuộm số lượng lớn.
Liên hệ