STADI MP Máy nhiễu xạ đa hình học với nhiễu xạ vi mô, đầu dò đa năng, tùy chọn nhiệt độ.

Lượt xem:
183
Thương hiệu:
Advanced measurement instruments (AMI) - Mỹ
Giá:
Liên hệ

● Nhiều đầu dò tia X đếm photon đơn.

● Phụ kiện nhiệt độ cao và thấp.

● Lựa chọn hình học bằng cách trượt vỏ ống.

Introduction

The STADI MP combines the two most common diffractometer configurations: Transmission/Debye-Scherrer and Bragg-Brentano geometry with an additional set-up for micro-diffraction.

Various single-photon-counting X-ray detectors
High and low temperature attachements
Transmission / Debye-Scherrer, High Flux and Bragg-Brentano mode
Geometry selection by sliding tube housing
One X-ray optic (Johann type monochromator) for all geometries – no exchange and no realignment necessary
All geometries running with pure Co, Cu, Mo or Ag Kα₁ radiation

ONE GONIOMETER – THREE GEOMETRIES

Transmission
High Flux | Micro Diffraction
Bragg-Brentano

STADI MP cropped verlauf 1 768x528

ADVANTAGES OF TRANSMISSION-/ DEBYE-SCHERRER GEOMETRY

Same sample volume in the beam over the full 2θ scale
Reliable intensities with no necessity for further mathematical corrections
No line broadening for weak absorbers
No height displacement
Real micro-sampling possible
Lesser effects of preferred orientation

Specifications

2θ range	-10° to +140° or better depending on selected geometry
Goniometer	2 circles
Radius of measuring circle	140 mm to 573 mm depending on selected geometry and detector
Radius of focusing circle	160 mm
X-ray sources	Sealed Tubes: Co, Cu, Mo, Ag
Software	WinXpow package
Detectors	Silicon strip detector MYTHEN2 R 1K/2K/3K/4K
Dimensions (Including system cabinet, max.)	1800 x 880 x 2050 mm
Weight (complete system)	870 kg
Accessories	High- and low-temperature attachments for reflection and capillary samples Reaction chamber for reflection samples Various sample stages Various sample changers

Mask group — STOE's famous transmission geometry. Making sample preparation easy and resulting in highest quality diffraction patterns.

DSC 7295 — The Debye-Scherrer geometry produces the highest quality diffraction patterns for moisture / air sensitive samples. In combination with STOE's removable videomicroscope, precise alignment of the capillaries is easy.

Bildschirmfoto 2022 08 15 um 12.34 5 — As misalignment of the sample strongly affects the quality of the results in reflectometry experiments, STOE’s reflectometry sample holder has been specifically designed for accurate alignment

Bildschirmfoto 2022 08 15 um 12.34 6 — The STADI MP comes with two beam guides for Bragg-Brentano or micro diffraction measurements.

Software & Accessories

WinXPOW, is a uniquely designed powder diffraction software developed exclusively by our skilled team at STOE. It is meticulously crafted to perfectly work with our instruments, ensuring seamless compatibility and optimal performance. In addition to controlling the instruments, WinXPOW provides a comprehensive range of cutting-edge features. These include data reduction, profile fitting, pattern indexing, and spacegroup determination. Moreover, it boasts an array of powerful functionalities, such as advanced 2D and 3D graphics, among numerous other capabilities.

We provide a wide range of accessories to customize your sample environment according to your specific requirements. Our products encompass high temperature and reaction chambers, sample changers, dedicated battery cell holders, and various other accessories to enhance your experimentation capabilities.

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Laboratory centrifuge TS-1

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required

Liên hệ

Chi tiêt Xem nhanh

COLOR WASHING FASTNESS TESTER (RAPID WASH)

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.

Liên hệ

Chi tiêt Xem nhanh

PRINTING MASTER PM-500

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.

Liên hệ

Chi tiêt Xem nhanh

AUTOMATIC WASHING MACHINE AW-12

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.

Liên hệ

Chi tiêt Xem nhanh

Laboratory ROLL MILL

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.

Liên hệ

Chi tiêt Xem nhanh

AUTO COATING DEVICE

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.

Liên hệ

Chi tiêt Xem nhanh

LABORATORY MINI OVEN

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.

Liên hệ

Chi tiêt Xem nhanh

Vertical type model P-AO

Hãng sx: RAPID (Labortex)

Vertical type model P-AO, this extremely versatile laboratory padding mangle is built as a floor model. High grade stainless steel construction. Ergonomically designed for fast, convenient use. Short samples as well as fabrics with a length of several meters can be easily dyed. Suitable for all dyeing, printing, finishing, and padding processes.

Liên hệ

Chi tiêt Xem nhanh

MINI TENTER

Hãng sx: RAPID (Labortex)

MINI TENTER, the Flexible Continuous pin chain type hot Air dryer, suitable for all applications where a certain sample length is required in a continuous process.

Liên hệ

Chi tiêt Xem nhanh

R-3

Hãng sx: RAPID (Labortex)

Table Model, Excellent laboratory dryer for all drying, setting, baking and thermosoling processes. The machine is designed to simulate the features of production scale stenter.

Liên hệ