Thiết bị kiểm tra đồ nội thất vạn năng GESTER Furniture Universal Testing Machine GT-LA10

Lượt xem:
252
Thương hiệu:
Gester - Trung Quốc
Giá:
Liên hệ

Máy kiểm tra đa năng đồ nội thất được sử dụng để kiểm tra các đặc tính cơ học của bàn, ghế, giường và ghế.

Product Detail

Furniture Universal Testing Machine GT-LA10

Product Introduction

Application:

This Furniture Testing Equipment is used for testing the mechanical properties of tables, desks, beds and chairs. Can perform the horizontal static load, vertical static load, impact test and durability test.

Feature:

1.The machine adopts frame structure design. The frame is made of high quality industrial aluminum, beautiful and generous.

2.The top frame of GT-LA10D is equipped with a lifting structure, and the height of the frame can be adjusted according to the height of the sample.

3. Up to 7 sets of loading cylinder installed, 4 sets in horizontal cylinders (2 sets in the frame, and the other 2 sets are independent split designs, which can be freely moved inside and outside the frame to adapt to different testing needs), 2 sets of vertical cylinder and 1set of impact cylinder on top frame. All cylinders can be adjusted up and down, frontward and backward to cover all mounting surfaces. The 7sets of cylinders can execute joint or independent operation.

4. The bottom fixed block is free to adjust the position to accommodate different specifications of the sample.

5. PLC +15 inch color touch screen to control the actions of the machine; the operation is intuitive and simple.

6. GESTER independent research and development unique design, adopting servo motor +cylinder drive mode way to greatly meet the international standards of force accuracy and test speed double requirements; high precision force sensor sense the force value immediately; each load group adjusts the control individually; the loading force is stable and reliable.

Removable loading pad, can easily change the different loading pad to meet the different test requirements.

Standards:

Tables & Desks

Storage Units

EN1730-2012 Section 6.2, 6.3, 6.4,6.5, 6.6, 7.2, 7.3 ,

BS EN 15372-2016 Test1, Test2,Test3,Test5, Test6,Test8,Test10,

AS NZS 4610.3-1999 Annex B,D,E,G,N,P,R

AS NZS 4442-1997 Annex A,B,H,J

EN527-3, EN581-3,

GB/T 10357.1,

ISO 7170 Section 6.2.2, 6.4.1,7.5.2

BS4875-7(corresponding with ISO7170)

IS 17633-2022 (Please refer to the detailed standard solution)

IS 17634-2022 (Please refer to the detailed standard solution)

Chairs

EN 1728-2012 Section 6.4, 6.5, 6.7, 6.12, 6.15, 6.16, 6.17, 6.24, 7.3, 7.4, 7.9, 8.2, 8.4.1,8.5 , 8.8

EN581-2-2015 (corresponding with EN1728-2012),

EN1335-3 -2009 Section 7.2.1, 7.2.2, 7.3.1

EN 1729-2-2012 Section 5.3.2, 5.3.3, 5.3.5, 5.3.6, 5.3.7

EN 16139-2013 (corresponding with EN1728-2012)

ISO 7173-1989 Section 7.1, 7.2, 7.3, 7.5, 7.6, 7.7, 7.8, 7.10

BS5459-2-2000 Section A5.1 5.2

BS5459-2-2000 Section A5.2,

GB/T 10357.3 -2013 Section 4.3, 6.4,4.7,4.8,4.10,4.11,6.9

Bed

EN 1725-2023 Section 6.6 TEST 1,2,3,4,5,6,7,8,12

ISO19833-2018Section6.2,6.3.1,6.3.2,6.4.1,6.4.2,6.4.3,6.5.1,6.5.2,6.6

EN 747-2 Section 5.4,5.5,5.6.1,5.7,5.8

IS 17636-2021(Please refer to the detailed standard solution)

Key Specifications

Model	GT-LA10C	GT-LA10D
Frame space (LWH)	54.82.9 M	54.83.2 M
Application	for Bed, Table & Desk, optional for chair	for Bunk Bed, Table & Desk, optional for chair
Control mode	PLC control
Force sensor	2.5KN
Control mode	PLC+15inch Touch screen +GESTER system
Driving method	AIRTAC cylinder: 7 pcs Servo motor :6 pcs
Air supply	≥0.6Mpa
Power supply	AC 220V 50HZ/60HZ
Machine weights	3000KG

Accessories:

Standard Accessories	4 sets	Horizontal loading device
	2 sets	Vertical loading device
	1set	Impact device
	1pc	GT-LB01-2 Seat loading pad
	2pcs	GT-LB01-3 Smaller seat loading pad
	6 pcs	GT-LB01-5 Local loading pad
	1 set	GT-LB01-6 Seat Impactor Device
	1 set(350Lbs)	GT-LB01-11 BIFMA Bag Type Impactor device
	8pcs	Stoppers
Optional Accessories	Optional	Testing unite and accessories for Chair
	1pc	GT-LB01-4 Back loading pad
	1pc	GT-LB01-18 305mm loading pad
	2pcs	GT-LA25 75kg Test Load
	2pcs	GT-LA25B 25kg Test Load
	1pc	200N Force Gauge/ Push-Pull Scale

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Máy kiểm tra số lượng sợi YCB:001

Hãng sx: Wira Instrumentation

Được thiết kế đặc biệt để kiểm tra số lượng sợi Thiết bị đo chính xác để xác định mật độ tuyến tính của sợi. Cân đếm sợi Wira là thiết bị lý tưởng để kiểm tra phân tích số lượng sợi. Các phép đo có thể xác định mật độ tuyến tính (khối lượng trên chiều dài) của các cuộn sợi và GSM (khối lượng trên mét vuông) của vải. Cân đếm sợi Wira đưa ra kết quả theo hệ thống Tex, dTex và các hệ thống đếm sợi khác như hệ mét (Nm), hệ Anh (Ne), hệ bông Anh (Nec), Denier (Td), v.v.

Liên hệ

Chi tiêt Xem nhanh

Máy đo độ căng của sợi dọc trong quá trình dệt - WARP TENSION METER

Hãng sx: Wira Instrumentation

Đo nhanh độ căng của sợi dọc trong quá trình dệt Máy đo độ căng sợi dọc WTM:003 nhỏ gọn được phát triển để đo lực kéo trong sợi dọc. Lực kết hợp của sợi dọc có chiều rộng 50 mm được đo bằng đầu đo có con lăn 100 mm. Kết quả được hiển thị trên một thiết bị hiển thị riêng. Người vận hành có thể cài đặt lưu trữ các giá trị độ căng AVG, LAST, MIN, MAX, PEAK-MIN, PEAK-MAX trong thời gian đo.

Liên hệ

Chi tiêt Xem nhanh

MÁY ĐO ĐỘ MỊN SỢI FFM:ELE2

Hãng sx: Wira Instrumentation

FIND THE AVERAGE DIAMETER OF WOOL AND OTHER FIBRES QUICKLY USING THE WELL PROVEN AIR FLOW PRINCIPLE The new generation Wira Fibre Fineness Meter incorporates a colour touch screen interface, making the operation even easier. An on-board processor controls automatically the operation of the instrument and calculates test results for direct reading on the screen, and if required, relayed to a PC, using optional Windows software from where the results can be stored in an Excel file and reports printed.

Liên hệ

Chi tiêt Xem nhanh

Lab Calender Model LC-250

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.

Liên hệ

Chi tiêt Xem nhanh

Laboratory soaping machine model SP-12

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.

Liên hệ

Chi tiêt Xem nhanh

LEATHER DYEING APPARATUS

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)

Liên hệ

Chi tiêt Xem nhanh

Laboratory centrifuge TS-1

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required

Liên hệ

Chi tiêt Xem nhanh

COLOR WASHING FASTNESS TESTER (RAPID WASH)

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.

Liên hệ

Chi tiêt Xem nhanh

PRINTING MASTER PM-500

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.

Liên hệ

Chi tiêt Xem nhanh

AUTOMATIC WASHING MACHINE AW-12

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.

Liên hệ