Máy đo độ bền Kéo cột đơn Gester GT-C02-1A (2.5KN)

Lượt xem:
4231
Thương hiệu:
Gester - Trung Quốc
Giá:
Liên hệ

Ứng dụng
Máy đo độ bền kéo đa năng (cột đơn) được thiết kế để thực hiện các phân tích hiệu suất cơ học khác nhau cho các loại vật liệu như vải dệt, vật liệu giày, da, kim loại và nhiều loại vật liệu xây dựng khác nhau. Nó có thể tiến hành kiểm tra độ bền kéo, kiểm tra độ xé rách và hơn thế nữa.

Tính năng
1. Quá trình xử lý sơn phun ở nhiệt độ cao được thực hiện trên bề mặt của thiết bị thử độ bền kéo đa năng, mang lại độ bền tuyệt vời không dễ bị phai màu.
2. Thiết bị này hỗ trợ người dùng chỉnh sửa chương trình thử nghiệm, công thức phân tích dữ liệu và báo cáo thử nghiệm theo loại vật liệu, đặc tính vật liệu và phương pháp thử nghiệm.
3. Máy kiểm tra độ bền kéo đa năng có thể cung cấp nhiều loại chức năng kiểm tra tiêu chuẩn khác nhau theo yêu cầu của người dùng. Đồng thời nó cũng cho phép tùy chỉnh.

Dệt May

Product Introduction

Application:

This Universal Tensile Strength Tester is designed for conduct tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line,yarn,fabric,paper,aviation, package, construction, petrifaction, electrician, vehicle and other materials. It is a basic equipment of quality control, receiving inspection, physical test, mechanics research, material development.

Standards:

ISO13934-1,13934-2,13935-1,13935-2,13936-1,13936-2,13936-3, 13937-2,13937-3,13937-4,1421, 2411, 2062, 4674-1,5082, 9073.3, 9073.4, 9073.18
BS 2543, 2576, 3320, 3424, 4303,
M&S P11, P12, P13, P14
JIS L1096

ASTM D 434, D751, D885, D1683, D2256, D2261, D2724, D2731, D3787, D4034, D4964, D5034, D5035, D5587, D5733, D5735.

Features

This tensile strength testing equipment adopt AC servo drive system, reducer, synchronous pulley, TBI precision ball screw components, instruments beam moving smoothly with low noise and high precision extension.
This machine adopt aluminum column shell, deal with high temperature & solidify injection on the machine surface will never fade.
This Tensile Strength Tester adopt many kinds of protection measures:

      a.Beam’s limit cams protecting device
      b.Clamp touch avoid protecting device
      c.Set up protection on displacement & load software
      d.Sensor overload protection
      e.Sample load software protection
      f.Overcurrent & overvoltage protection

Real time supervision to main parts, more safe & reliable while using machine.
This universal tensile testing machine adopt open system: user can edit test program, data analysis formula, test report according to test material’s category, character and test methods requires.

Key Specifications

Model	GT-C02-1A		GT-C02-1B
Display	Computer Display
Max. Capacity	2.5KN	5KN
Force Resolution	1/100000
Force Accuracy	≤+/-0.2%F.S
Stroke	1000mm
Test Speed	0.01-1000mm/min
Stop Mode	Overload stop, emergency stop button, specimen damage automatic stop, upper & lower limit set automatic stop, automatic return function
Machine Drive	Servo motor drive, Synchronous wheel and precision ball screw drive
Power	200W
Power Supply	AC 220V 50/60HZ
Dimensions ( W x D x H )	550×400×1490mm
Weight	120kgs

Accessories

Standards accessories	1set	Pneumatic Grips
	1pc	English Operation Software
	1pc	Cable Connect with PC
	1pc	Load cell
Optional accessories	Optional	Other Grips and Load Cell
Optional accessories	1set	Desk Top Computer

Application Industry

All kinds of materials can be tested by the Universal Tensile Strength Tester Single Column

Universal Tensile Strength Tester (Single Column)

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Lab Calender Model LC-250

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.

Liên hệ

Chi tiêt Xem nhanh

Laboratory soaping machine model SP-12

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.

Liên hệ

Chi tiêt Xem nhanh

LEATHER DYEING APPARATUS

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)

Liên hệ

Chi tiêt Xem nhanh

Laboratory centrifuge TS-1

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required

Liên hệ

Chi tiêt Xem nhanh

COLOR WASHING FASTNESS TESTER (RAPID WASH)

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.

Liên hệ

Chi tiêt Xem nhanh

PRINTING MASTER PM-500

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.

Liên hệ

Chi tiêt Xem nhanh

AUTOMATIC WASHING MACHINE AW-12

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.

Liên hệ

Chi tiêt Xem nhanh

Laboratory ROLL MILL

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.

Liên hệ

Chi tiêt Xem nhanh

AUTO COATING DEVICE

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.

Liên hệ

Chi tiêt Xem nhanh

LABORATORY MINI OVEN

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.

Liên hệ