Thiết bị thử nghiệm dệt may (Textile testing equipments)

Thiết bị thử nghiệm dệt may (Textile testing equipments)

Danh mục sản phẩm

Hãng sx: Wira Instrumentation

Dễ dàng đo khối lượng sợi bằng thiết bị Wira tiện lợi Máy đo khối lượng sợi có thể được sử dụng để kiểm soát chất lượng (ví dụ: để kiểm tra sự thay đổi khối lượng giữa các bó sợi) và đảm bảo chất lượng (ví dụ: để kiểm tra khối lượng sợi mua). Nó cung cấp tính linh hoạt khi sử dụng vì nó cung cấp tùy chọn đo lường không phá hủy hoặc phá hủy.
Liên hệ

Hãng sx: Wira Instrumentation

Được thiết kế đặc biệt để kiểm tra số lượng sợi Thiết bị đo chính xác để xác định mật độ tuyến tính của sợi. Cân đếm sợi Wira là thiết bị lý tưởng để kiểm tra phân tích số lượng sợi. Các phép đo có thể xác định mật độ tuyến tính (khối lượng trên chiều dài) của các cuộn sợi và GSM (khối lượng trên mét vuông) của vải. Cân đếm sợi Wira đưa ra kết quả theo hệ thống Tex, dTex và các hệ thống đếm sợi khác như hệ mét (Nm), hệ Anh (Ne), hệ bông Anh (Nec), Denier (Td), v.v.
Liên hệ

Hãng sx: Wira Instrumentation

Đo nhanh độ căng của sợi dọc trong quá trình dệt Máy đo độ căng sợi dọc WTM:003 nhỏ gọn được phát triển để đo lực kéo trong sợi dọc. Lực kết hợp của sợi dọc có chiều rộng 50 mm được đo bằng đầu đo có con lăn 100 mm. Kết quả được hiển thị trên một thiết bị hiển thị riêng. Người vận hành có thể cài đặt lưu trữ các giá trị độ căng AVG, LAST, MIN, MAX, PEAK-MIN, PEAK-MAX trong thời gian đo.
Liên hệ

Hãng sx: Wira Instrumentation

FIND THE AVERAGE DIAMETER OF WOOL AND OTHER FIBRES QUICKLY USING THE WELL PROVEN AIR FLOW PRINCIPLE The new generation Wira Fibre Fineness Meter incorporates a colour touch screen interface, making the operation even easier. An on-board processor controls automatically the operation of the instrument and calculates test results for direct reading on the screen, and if required, relayed to a PC, using optional Windows software from where the results can be stored in an Excel file and reports printed.
Liên hệ

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.
Liên hệ

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required
Liên hệ

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.
Liên hệ

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.
Liên hệ

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.
Liên hệ

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.
Liên hệ

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.
Liên hệ

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.
Liên hệ

Hãng sx: RAPID (Labortex)

Vertical type model P-AO, this extremely versatile laboratory padding mangle is built as a floor model. High grade stainless steel construction. Ergonomically designed for fast, convenient use. Short samples as well as fabrics with a length of several meters can be easily dyed. Suitable for all dyeing, printing, finishing, and padding processes.
Liên hệ

Hãng sx: RAPID (Labortex)

MINI TENTER, the Flexible Continuous pin chain type hot Air dryer, suitable for all applications where a certain sample length is required in a continuous process.
Liên hệ

R-3

Hãng sx: RAPID (Labortex)

Table Model, Excellent laboratory dryer for all drying, setting, baking and thermosoling processes. The machine is designed to simulate the features of production scale stenter.
Liên hệ

Hãng sx: RAPID (Labortex)

Saturated and HT-Steamer, suitable for the chemical and dyestuff industry, finishing plants, research institutes and general textile industry. Basic design as MINI-DRYER, model R-3, owing the wide adjusting ranges regarding temperature, humidity, dwelling time.
Liên hệ

Hãng sx: RAPID (Labortex)

LAB WASHER phòng thí nghiệm, chủ yếu là 4 bể là thiết kế chính, có thể được sử dụng trong hoạt động của một máy hoặc kết hợp máy cán, hút, hấp và nhuộm liên tục PS-J hoặc PS-JS.
Liên hệ

Hãng sx: RAPID (Labortex)

Suitable for carrying out all PAD STEAM processes with saturated steam, offers the shortest distance between padding mangle and steaming chamber.
Liên hệ