MÁY ĐO ĐỘ MỊN SỢI FFM:ELE2

MÁY ĐO ĐỘ MỊN SỢI FFM:ELE2

  • 4153
  • Wira Instrumentation
  • Liên hệ
FIND THE AVERAGE DIAMETER OF WOOL AND OTHER FIBRES QUICKLY USING THE WELL PROVEN AIR FLOW PRINCIPLE
The new generation Wira Fibre Fineness Meter incorporates a colour touch screen interface, making the operation even easier.

An on-board processor controls automatically the operation of the instrument and calculates test results for direct reading on the screen, and if required, relayed to a PC, using optional Windows software from where the results can be stored in an Excel file and reports printed.

Calibration

Each meter is calibrated using standard dry-combed tops available from Interwoollabs.

Calibration for dry combed tops is carried out in accordance with method 2 in test method IWTO-6-13. For the testing of loose wool core samples, the meter is calibrated using short randomised open fibre, prepared from standard tops following the procedure in test method IWTO-28-13.

Special calibrations are available for the testing of fibres other than wool e.g. glass fibres, mineral fibres, cotton, cashmere, mohair etc. Optional temperature and humidity probe allows automatic recording of lab conditions.

Test Method

A 2.5g sample of fibres is placed in the sample chamber. Air is drawn through the sample by a vacuum pump supplied with the instrument. Electronic sensors measure both the airflow and the air pressure, from which the fibre diameter is automatically calculated.

 

Key Features

✔ Colour Touch Screen

✔ Automatic calculation of values

✔ Direct reading of results

✔ Complies with latest IWTO recommendations

✔ On-board processor

✔ Ergonomically designed

✔ Electronic flow and pressure sensors

✔ RS232 output to PC
✔ Optional software to capture results and store as spreadsheet

✔ Full calibrated service available for existing instruments

 

Conforms to: BS ISO 1136:2015, IWTO-6-2013,IWTO-28-2013

Dimensions: 450mm (W), 410mm(D), 235mm (H)

Power Consumption: 750 W Options: PC Windows Software.

 

Order Code: FFM:ELE2

Tập tin PDF:

Sản phẩm cùng loại

Hãng sx: RAPID (Labortex)

The basic principle of PMT-350 machine was to have a laboratory machine which has exactly the same possibilities and characteristics like a production STENTER machine. PMT-350 is a continuous operation apparatus suitable for drying, curing, continuous dyeing of sample.
Liên hệ

MSP

Hãng sx: RAPID (Labortex)

Model MSP, hoạt động liên tục để hấp vải in hoặc sau khi xử lý vải nhuộm trong hơi nước bão hòa lên đến 102℃±2℃. * Tất cả đều làm bằng thép không gỉ * Kích thước mẫu: Rộng tối đa 300mm (model MSP-300) Rộng tối đa 600mm (model MSP-600) Không giới hạn chiều dài. * Thời gian lưu trong buồng hơi: 3-18 phút (tốc độ khác theo yêu cầu) * Tùy chọn hơi nước nhiệt độ cao trong buồng bằng bộ điều khiển nhiệt độ và thiết kế gia nhiệt bằng điện.
Liên hệ

Hãng sx: RAPID (Labortex)

ROBOT DOSER là hệ thống định lượng phòng thí nghiệm thiết kế không ống để có độ chính xác tối ưu trong quá trình chuẩn bị bể nhuộm.
Liên hệ

Hãng sx: RAPID (Labortex)

AUSTOCK Pro replaces traditional labor intensive method of preparing stock solution standards. At the time of solution making, there is no need to add a specified amount of dyestuff, AUSTOCK Pro can automatically adjust the total solution volume according to the amount of dye added to achieve the correct concentration. As AUSTOCK PRO is computer controlled, the degree of accuracy achieved is without parallel.
Liên hệ

Hãng sx: RAPID (Labortex)

"TỦ NHUỘM", thiết kế dạng sàn có ngăn kéo tích hợp, được sử dụng để lưu trữ tất cả các loại thuốc nhuộm trong phòng thí nghiệm. có thể kết hợp với "Hệ thống định lượng phòng thí nghiệm, EZ DOSER" của chúng tôi để tránh người vận hành lấy nhầm thuốc nhuộm khi pha chế dung dịch gốc.
Liên hệ

Hãng sx: RAPID (Labortex)

EZ DOSER (thiết kế ba trong một), hệ thống định lượng phòng thí nghiệm mới nhất, nguyên lý hoạt động của việc phân phối công thức dựa trên phép đo thể tích bằng cách sử dụng một ống nhỏ giọt robot tiên tiến, bên cạnh việc phân phối công thức, sản phẩm này còn tích hợp với hệ thống pha chế và khuấy dung dịch gốc, mỗi chức năng có thể hoạt động độc lập và chính xác. EZ DOSER là một thiết bị không thể thiếu trong phòng thí nghiệm nhuộm để tăng khả năng tái tạo của nhuộm số lượng lớn.
Liên hệ

Hãng sx: RAPID (Labortex)

Máy khuấy từ loại từ, chạy bằng động cơ DC24V, đơn giản và dễ sử dụng, phù hợp với mọi ứng dụng khuấy.
Liên hệ

Hãng sx: RAPID (Labortex)

The routine work in color laboratory including stock solution preparation and recipe dispensing process, our CCK 40 system can function independently for both process. Due to compact design, affordable cost, extremely precise, easy operation etc., CCK 40 system particularly suitable for Dyestuff company, R&D, QC department, Institute, small scale dyeing laboratory etc.
Liên hệ

Hãng sx: RAPID (Labortex)

ECO DYER là máy nhuộm phòng thí nghiệm dẫn nhiệt bằng điện, thiết kế dẫn nhiệt tiên tiến loại bỏ hoàn toàn những nhược điểm hiện có của cả máy nhuộm loại Glycerin và loại Hồng ngoại, không chỉ tích hợp những ưu điểm của máy nhuộm loại Glycerin mà còn cung cấp các tính năng của máy nhuộm loại Hồng ngoại.
Liên hệ

Hãng sx: RAPID (Labortex)

RAPID COLOR là máy nhuộm phòng thí nghiệm linh hoạt và kinh tế nhất, phù hợp cho mục đích chung của phòng thí nghiệm trong điều kiện nhiệt độ cao, chẳng hạn như thử nghiệm nhuộm theo công thức, thử nghiệm độ bền giặt và các ứng dụng R&D có liên quan. Máy được trang bị hệ thống kiểm soát nhiệt độ hiện đại và có nhiều kích cỡ nồi có sẵn. Polyethylene glycol loại 400 (Glycerin) sẽ được sử dụng làm môi trường gia nhiệt để đảm bảo gia nhiệt an toàn và đều mà không có khói quá mức.
Liên hệ