Máy đo độ xoắn của sợi đơn và sợi đôi Twist-tester 17

Máy đo độ xoắn của sợi đơn và sợi đôi Twist-tester 17

  • 5200
  • Châu Âu
  • Liên hệ
- Máy kiểm tra độ xoắn Branca 17 cho phép phân tích số vòng xoắn theo hướng S hoặc Z của sợi đơn và sợi xoắn
- Có thể lựa chọn hướng xoắn theo hướng SZS hoặc ZSZ bằng công tắc chuyển đổi để cài đặt hướng quay của động cơ
- Đầu thử nghiệm tự động với cảm biến tiệm cận để dừng hoạt động của động cơ trong quá trình thử nghiệm tháo xoắn-xoắn lại theo phương pháp ASTM 1423 cho sợi đơn.
- Tiêu chuẩn : ISO 2061 - ASTM D 1422 - ASTM D1423 - UNI EN ISO 2061 - IWTO 25-70/E - DIN 53832/1 - BS 2085

Automatic test end with proximity sensor to stop motor operation during untwist-retwist test method ASTM 1423 for single yarns.

twist-direction-S twist-direction-Z

The reading of twisting no. in S or Z direction through the counters helps the operator to have an instant reading of twisting no. of the sample under examination.

twist-tester-counters

The left side dial counter shows the thousands and hundreds of twists, while the right one the tenths and units of twists.

The control panel of the tester allows the user to switch twist direction in S or Z, to select the test method in Untwist-Retwist or Direct counting and to adjust motor speed with external potentiometer during the test running.

On the left side the elongation movable equipment it is included the elongation scale, equipped with index lancet, while the pretension weights can be loaded to the pretension tray according to the yarn count of the sample under examination.

The elongation scale shows clearly the behaviour of yarns during untwist, and it can be analysed the yarn maximum elongation thanks to its double measuring scale expressed in millimetres and inches.

elongation-movable-equipment sample-length-scale

This elongation movable equipment can be shifted transversally by the operator along instrument basement and fixed at the desired length always expressed in millimetres or inches, e.g. 0 - 50 cm for the standard fixing the desired distance length between the two clamps.

TEST METHODS:

  • Untwist-retwist according to UNI ASTM D 1423
  • Direct counting according to UNI EN ISO 2061, ASTM D 1423

 

INCLUDED:

  • Separation needle, to separate the plied and multi-plied yarns during the untwist;
  • Magnifying glass, to check the yarn under examination during the untwist;
  • Standard sample length:
    • 0…50 cm
  • Extended model with sample lengths:
    • 0…1 m
    • 0…2 m

Tập tin PDF:

Sản phẩm cùng loại

Hãng sx: RAPID (Labortex)

The basic principle is to have a continuous type laboratory machine which exactly has the same characteristics like a production STENTER machine to replicate testing results, suitable for drying, thermosoling and curing samples. P-TENTER consists of the following parts: - 1 pair of vertical type pneumatic mangle, model P-A1 - 1 hot-air dryer with pin-chain transportation system, model MINI-TENTER - 1 fabric pin-up device
Liên hệ

Hãng sx: RAPID (Labortex)

The basic principle of PMT-350 machine was to have a laboratory machine which has exactly the same possibilities and characteristics like a production STENTER machine. PMT-350 is a continuous operation apparatus suitable for drying, curing, continuous dyeing of sample.
Liên hệ

MSP

Hãng sx: RAPID (Labortex)

Model MSP, hoạt động liên tục để hấp vải in hoặc sau khi xử lý vải nhuộm trong hơi nước bão hòa lên đến 102℃±2℃. * Tất cả đều làm bằng thép không gỉ * Kích thước mẫu: Rộng tối đa 300mm (model MSP-300) Rộng tối đa 600mm (model MSP-600) Không giới hạn chiều dài. * Thời gian lưu trong buồng hơi: 3-18 phút (tốc độ khác theo yêu cầu) * Tùy chọn hơi nước nhiệt độ cao trong buồng bằng bộ điều khiển nhiệt độ và thiết kế gia nhiệt bằng điện.
Liên hệ

Hãng sx: RAPID (Labortex)

ROBOT DOSER là hệ thống định lượng phòng thí nghiệm thiết kế không ống để có độ chính xác tối ưu trong quá trình chuẩn bị bể nhuộm.
Liên hệ

Hãng sx: RAPID (Labortex)

AUSTOCK Pro replaces traditional labor intensive method of preparing stock solution standards. At the time of solution making, there is no need to add a specified amount of dyestuff, AUSTOCK Pro can automatically adjust the total solution volume according to the amount of dye added to achieve the correct concentration. As AUSTOCK PRO is computer controlled, the degree of accuracy achieved is without parallel.
Liên hệ

Hãng sx: RAPID (Labortex)

"TỦ NHUỘM", thiết kế dạng sàn có ngăn kéo tích hợp, được sử dụng để lưu trữ tất cả các loại thuốc nhuộm trong phòng thí nghiệm. có thể kết hợp với "Hệ thống định lượng phòng thí nghiệm, EZ DOSER" của chúng tôi để tránh người vận hành lấy nhầm thuốc nhuộm khi pha chế dung dịch gốc.
Liên hệ

Hãng sx: RAPID (Labortex)

EZ DOSER (thiết kế ba trong một), hệ thống định lượng phòng thí nghiệm mới nhất, nguyên lý hoạt động của việc phân phối công thức dựa trên phép đo thể tích bằng cách sử dụng một ống nhỏ giọt robot tiên tiến, bên cạnh việc phân phối công thức, sản phẩm này còn tích hợp với hệ thống pha chế và khuấy dung dịch gốc, mỗi chức năng có thể hoạt động độc lập và chính xác. EZ DOSER là một thiết bị không thể thiếu trong phòng thí nghiệm nhuộm để tăng khả năng tái tạo của nhuộm số lượng lớn.
Liên hệ

Hãng sx: RAPID (Labortex)

Máy khuấy từ loại từ, chạy bằng động cơ DC24V, đơn giản và dễ sử dụng, phù hợp với mọi ứng dụng khuấy.
Liên hệ

Hãng sx: RAPID (Labortex)

The routine work in color laboratory including stock solution preparation and recipe dispensing process, our CCK 40 system can function independently for both process. Due to compact design, affordable cost, extremely precise, easy operation etc., CCK 40 system particularly suitable for Dyestuff company, R&D, QC department, Institute, small scale dyeing laboratory etc.
Liên hệ

Hãng sx: RAPID (Labortex)

ECO DYER là máy nhuộm phòng thí nghiệm dẫn nhiệt bằng điện, thiết kế dẫn nhiệt tiên tiến loại bỏ hoàn toàn những nhược điểm hiện có của cả máy nhuộm loại Glycerin và loại Hồng ngoại, không chỉ tích hợp những ưu điểm của máy nhuộm loại Glycerin mà còn cung cấp các tính năng của máy nhuộm loại Hồng ngoại.
Liên hệ