Tấm Fuji Film kiểm ra độ đồng đều lực ép của lô ép

Lượt xem:
136
Thương hiệu:
Feltest
Giá:
Liên hệ

Màng cảm quang Fuji thường được sử dụng để phát hiện sự phân bố tải trọng không đồng đều trong bộ phận ép, máy ép định cỡ và máy cán. Các ứng dụng khác bao gồm kiểm tra chất lượng cuộn của máy cuộn lại và gioăng của hệ thống hơi nước và nước ngưng tụ.

Ngành Giấy Giấy Tissue Bao Bì Giấy Carton Bao Bì Nhựa

Improve the yield: check the nip load distribution

Non-uniform nips usually lead to wrinkles, web breaks and poor sheet profiles. These are all costly problems that can ruin the machine’s runnability and yield.

With Fuji Pressure Sensitive Film it is easy detect uneven loads, incorrect crowning, misalignment and damaged or defective roll covers.

Better runnability

The coated sides of both transfer sheets (with the matte finish) must face each other. When pressure is applied, the microcapsules are broken and the color-forming material transfers to the color-developing material and chemically reacts, generating a red color.

The higher the pressure, the more capsules will burst and the more intense the color will be.

FAQ's

A paper machine runs 24/7 so if you must make decisions for the next shutdown, you need to collect data on the fly. Luckily, there's the Caliper Profiler.

“Thanks to the easy to interpret changes in color intensity we found some defects in the rubber roll cover.”

— ROB S. (USA)
“Thanks to the easy to interpret changes in color intensity we found some defects in the rubber roll cover.”

— ROB S. (USA)

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Máy đo độ căng của sợi dọc trong quá trình dệt - WARP TENSION METER

Hãng sx: Wira Instrumentation

Đo nhanh độ căng của sợi dọc trong quá trình dệt Máy đo độ căng sợi dọc WTM:003 nhỏ gọn được phát triển để đo lực kéo trong sợi dọc. Lực kết hợp của sợi dọc có chiều rộng 50 mm được đo bằng đầu đo có con lăn 100 mm. Kết quả được hiển thị trên một thiết bị hiển thị riêng. Người vận hành có thể cài đặt lưu trữ các giá trị độ căng AVG, LAST, MIN, MAX, PEAK-MIN, PEAK-MAX trong thời gian đo.

Liên hệ

Chi tiêt Xem nhanh

MÁY ĐO ĐỘ MỊN SỢI FFM:ELE2

Hãng sx: Wira Instrumentation

FIND THE AVERAGE DIAMETER OF WOOL AND OTHER FIBRES QUICKLY USING THE WELL PROVEN AIR FLOW PRINCIPLE The new generation Wira Fibre Fineness Meter incorporates a colour touch screen interface, making the operation even easier. An on-board processor controls automatically the operation of the instrument and calculates test results for direct reading on the screen, and if required, relayed to a PC, using optional Windows software from where the results can be stored in an Excel file and reports printed.

Liên hệ

Chi tiêt Xem nhanh

Lab Calender Model LC-250

Hãng sx: RAPID (Labortex)

Lab Calender Model LC-250 is suitable for calendaring test by controlling pressure, heat and friction applied on fabric surface. The machine consists of two rollers placed vertically, the upper roller is made of Nylon, the lower steel roller as a heater, driven by a motor to rotate.

Liên hệ

Chi tiêt Xem nhanh

Laboratory soaping machine model SP-12

Hãng sx: RAPID (Labortex)

Laboratory soaping machine model SP-12 is a 12-position unit used for after-treatment processes of dyed samples (yarn or fabric) as well as printed textiles. Samples are placed in different stainless steel pots, operators may add chemicals manually , then agitated them in the heating bath. Suitable for many kinds of after-treatment processes, such as soaping, scoring, bleaching, cotton burn-out in sulfuric acid, etc.

Liên hệ

Chi tiêt Xem nhanh

LEATHER DYEING APPARATUS

Hãng sx: RAPID (Labortex)

A versatile apparatus for dyeing tanning, leather and other processes in the production of leather * Max. dyeing temperature: 98 ℃ * Electric heating system * Revolving speed infinitely variable * Drum diameter: 250mm or 150mm * No. of drum: 8 (other available on request)

Liên hệ

Chi tiêt Xem nhanh

Laboratory centrifuge TS-1

Hãng sx: RAPID (Labortex)

Laboratory centrifuge TS-1 is used to remove excess water from samples after dyeing or washing before hot-air drying. Simple operation, NO technical skills are required

Liên hệ

Chi tiêt Xem nhanh

COLOR WASHING FASTNESS TESTER (RAPID WASH)

Hãng sx: RAPID (Labortex)

This testing machine RAPID WASH is specially designed to conduct color fastness testing in compliance with all major international standards.

Liên hệ

Chi tiêt Xem nhanh

PRINTING MASTER PM-500

Hãng sx: RAPID (Labortex)

This exceptional machine perfectly eliminates the inconsistency caused by manual operation, not only helping laboratories with automation, but also ensuring reproducibility between each test. With an electromagnetic bar for flatbed screen, printing speed, operating range and pressure of the scroller bar are adjustable through electromagnets. Operators can pre-set all relevant parameters in the touch screen controller. The printing table is equipped with special holders to fix the screen in the correct position.

Liên hệ

Chi tiêt Xem nhanh

AUTOMATIC WASHING MACHINE AW-12

Hãng sx: RAPID (Labortex)

AW-12 is indispensable Lab equipment used for carrying out post-processing such as washing, scoring and soaping for dyed yarn, fabric or any textile samples. Users just need to place textile samples into stainless steel washing pots, then water adding, chemical dosing, washing as well as draining will be automatically processed by a programmable controller. Samples with solution can be gently agitated by air turbulence which is introduced by blowers, therefore, manual stirring is no longer required.

Liên hệ

Chi tiêt Xem nhanh

Laboratory ROLL MILL

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.

Liên hệ