Tấm Fuji Film kiểm ra độ đồng đều lực ép của lô ép

Lượt xem:
135
Thương hiệu:
Feltest
Giá:
Liên hệ

Màng cảm quang Fuji thường được sử dụng để phát hiện sự phân bố tải trọng không đồng đều trong bộ phận ép, máy ép định cỡ và máy cán. Các ứng dụng khác bao gồm kiểm tra chất lượng cuộn của máy cuộn lại và gioăng của hệ thống hơi nước và nước ngưng tụ.

Ngành Giấy Giấy Tissue Bao Bì Giấy Carton Bao Bì Nhựa

Improve the yield: check the nip load distribution

Non-uniform nips usually lead to wrinkles, web breaks and poor sheet profiles. These are all costly problems that can ruin the machine’s runnability and yield.

With Fuji Pressure Sensitive Film it is easy detect uneven loads, incorrect crowning, misalignment and damaged or defective roll covers.

Better runnability

The coated sides of both transfer sheets (with the matte finish) must face each other. When pressure is applied, the microcapsules are broken and the color-forming material transfers to the color-developing material and chemically reacts, generating a red color.

The higher the pressure, the more capsules will burst and the more intense the color will be.

FAQ's

A paper machine runs 24/7 so if you must make decisions for the next shutdown, you need to collect data on the fly. Luckily, there's the Caliper Profiler.

“Thanks to the easy to interpret changes in color intensity we found some defects in the rubber roll cover.”

— ROB S. (USA)
“Thanks to the easy to interpret changes in color intensity we found some defects in the rubber roll cover.”

— ROB S. (USA)

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

AUTO COATING DEVICE

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.

Liên hệ

Chi tiêt Xem nhanh

LABORATORY MINI OVEN

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.

Liên hệ

Chi tiêt Xem nhanh

Vertical type model P-AO

Hãng sx: RAPID (Labortex)

Vertical type model P-AO, this extremely versatile laboratory padding mangle is built as a floor model. High grade stainless steel construction. Ergonomically designed for fast, convenient use. Short samples as well as fabrics with a length of several meters can be easily dyed. Suitable for all dyeing, printing, finishing, and padding processes.

Liên hệ

Chi tiêt Xem nhanh

MINI TENTER

Hãng sx: RAPID (Labortex)

MINI TENTER, the Flexible Continuous pin chain type hot Air dryer, suitable for all applications where a certain sample length is required in a continuous process.

Liên hệ

Chi tiêt Xem nhanh

R-3

Hãng sx: RAPID (Labortex)

Table Model, Excellent laboratory dryer for all drying, setting, baking and thermosoling processes. The machine is designed to simulate the features of production scale stenter.

Liên hệ

Chi tiêt Xem nhanh

HT-Steamer H-TS-3

Hãng sx: RAPID (Labortex)

Saturated and HT-Steamer, suitable for the chemical and dyestuff industry, finishing plants, research institutes and general textile industry. Basic design as MINI-DRYER, model R-3, owing the wide adjusting ranges regarding temperature, humidity, dwelling time.

Liên hệ

Chi tiêt Xem nhanh

Máy rửa liên tục LAB WASHER

Hãng sx: RAPID (Labortex)

LAB WASHER phòng thí nghiệm, chủ yếu là 4 bể là thiết kế chính, có thể được sử dụng trong hoạt động của một máy hoặc kết hợp máy cán, hút, hấp và nhuộm liên tục PS-J hoặc PS-JS.

Liên hệ