Máy kiểm tra đa năng giường GT-LA10 Bed Universal Testing Machine

Lượt xem:
262
Thương hiệu:
Gester - Trung Quốc
Giá:
Liên hệ

Máy kiểm tra đồ nội thất GESTER này được sử dụng để kiểm tra các đặc tính cơ học của bàn, ghế, giường và giường tầng, nó có thể thực hiện kiểm tra tải trọng tĩnh ngang, tải trọng tĩnh dọc, kiểm tra va đập và kiểm tra độ bền.

Bed Universal Testing Machine GT-LA10

Product Introduction

This GESTER furniture tester is used for testing the mechanical properties of tables, desks, beds and bunk, it can perform the horizontal static load, vertical static load, impact test and durability test.

The bed testing machine adopts frame structure design. The frame is made of high quality industrial aluminum, beautiful and generous.
The top frame of GT-LA10B is equipped with a lifting structure, and the height of the frame can be adjusted according to the height of the sample.
Up to 7 sets of loading cylinder installed, 4 sets in horizontal cylinders (2 sets in the frame, and the other 2 sets are independent split designs, which can be freely moved inside and outside the frame to adapt to different testing needs), 2 sets of vertical cylinder and 1set of impact cylinder on top frame. All cylinders can be adjusted up and down, frontward and backward to cover all mounting surfaces. The 7sets of cylinders can execute joint or independent operation.
The bottom fixed block is free to adjust the position to accommodate different specifications of the sample.
PLC +15 inch color touch screen to control the actions of the machine; the operation is intuitive and simple.
GESTER independent research and development unique design, adopting servo motor +cylinder drive mode way to greatly meet the international standards of force accuracy and test speed double requirements; high precision force sensor sense the force value immediately; each load group adjusts the control individually; the loading force is stable and reliable.
Removable loading pad, can easily change the different loading pad to meet the different test requirements.

Bed & Bunk Standards:

EN 1725-2023 Section 6.6 TEST 1,2,3,4,5,6,7,8,12

ISO19833-2018 Section6.2,6.3.1,6.3.2,6.4.1,6.4.2,6.4.3,6.5.1,6.5.2,6.6

EN 747-2 Section 5.4,5.5,5.6.1,5.7,5.8

IS 17636-2021 (Please refer to the detailed standard solution)

Key Specifications

Model	GT-LA10A	GT-LA10B
Frame space (LWH)	54.82.9 M	54.83.2M
Application	for Bed	for Bunk Bed
Control mode	PLC control
Force sensor	2.5KN
Control mode	PLC+15inch Touch screen +GESTER system
Driving method	AIRTAC cylinder: 7 pcs Servo motor :6 pcs
Air supply	≥0.6Mpa
Power supply	AC 220V 50HZ/60HZ
Machine weights	3000KG

Bed Universal Testing Machine GT-LA10

Accessories:

Standard Accessories	4 sets	Horizontal loading device
	2 sets	Vertical loading device
	1set	Impact device
	1 pc	GT-LB01-2 Seat loading pad
	2 pcs	GT-LB01-3 Smaller seat loading pad
	6 pcs	GT-LB01-5 Local loading pad
	1 set	GT-LB01-6 Seat Impactor Device
	1 set (350Lbs)	GT-LB01-11 BIFMA Bag Type Impactor device
	8 pcs	Stoppers
Optional Accessories	2 pcs	GT-LA25 75kg Test Load
	2 pcs	GT-LA25B 25kg Test Load
	1 pc	200N Force Gauge/ Push-Pull Scale

Tập tin PDF:

Sản phẩm cùng loại

Chi tiêt Xem nhanh

Laboratory ROLL MILL

Hãng sx: RAPID (Labortex)

Laboratory ROLL MILL is a compact model with lowest noise level, highest safety, its specially-designed electric heaters evenly and accurately radiate heat to achieve the required surface temperature according to the command given by two modernized temperature controllers.

Liên hệ

Chi tiêt Xem nhanh

AUTO COATING DEVICE

Hãng sx: RAPID (Labortex)

AUTO COATING, an indispensable device for laboratory coating process. For conventional coating process, the inconsistent speed and pressure always causes serious problem regarding uneven coating quality. Our AUTO COATING device is designed to fulfill in every coating necessity with the best reproducibility.

Liên hệ

Chi tiêt Xem nhanh

LABORATORY MINI OVEN

Hãng sx: RAPID (Labortex)

LABORATORY MINI OVEN is designed to be paired up with our AUTO COATING device. The integrated pin-frame is compatible with both machines; therefore, samples can be directly moved to this hot-air oven for drying treatment after coating without any re-pinning process.

Liên hệ

Chi tiêt Xem nhanh

Vertical type model P-AO

Hãng sx: RAPID (Labortex)

Vertical type model P-AO, this extremely versatile laboratory padding mangle is built as a floor model. High grade stainless steel construction. Ergonomically designed for fast, convenient use. Short samples as well as fabrics with a length of several meters can be easily dyed. Suitable for all dyeing, printing, finishing, and padding processes.

Liên hệ

Chi tiêt Xem nhanh

MINI TENTER

Hãng sx: RAPID (Labortex)

MINI TENTER, the Flexible Continuous pin chain type hot Air dryer, suitable for all applications where a certain sample length is required in a continuous process.

Liên hệ

Chi tiêt Xem nhanh

R-3

Hãng sx: RAPID (Labortex)

Table Model, Excellent laboratory dryer for all drying, setting, baking and thermosoling processes. The machine is designed to simulate the features of production scale stenter.

Liên hệ

Chi tiêt Xem nhanh

HT-Steamer H-TS-3

Hãng sx: RAPID (Labortex)

Saturated and HT-Steamer, suitable for the chemical and dyestuff industry, finishing plants, research institutes and general textile industry. Basic design as MINI-DRYER, model R-3, owing the wide adjusting ranges regarding temperature, humidity, dwelling time.

Liên hệ

Chi tiêt Xem nhanh

Máy rửa liên tục LAB WASHER

Hãng sx: RAPID (Labortex)

LAB WASHER phòng thí nghiệm, chủ yếu là 4 bể là thiết kế chính, có thể được sử dụng trong hoạt động của một máy hoặc kết hợp máy cán, hút, hấp và nhuộm liên tục PS-J hoặc PS-JS.

Liên hệ