Vertical type model P-AO

Vertical type model P-AO

  • 8370
  • RAPID (Labortex)
  • Liên hệ
Vertical type model P-AO, this extremely versatile laboratory padding mangle is built as a floor model. High grade stainless steel construction. Ergonomically designed for fast, convenient use. Short samples as well as fabrics with a length of several meters can be easily dyed. Suitable for all dyeing, printing, finishing, and padding processes.

AIR PAD has been equipped with a pneumatic load system and therefore it needs a supply of compressed air. Two very precise pressure gauges enable a good reproducibility of the required squeezing pressure. The latter can be adjusted on two independent pressure regulators. By simulating the production level process parameters on laboratory scale, satisfactory results can be achieved with AIR-PAD.

* Roller width 450mm diameter 125mm

* Padding rollers of 70 shore hardness

* Content of liquor trough approx. 500cc

* Safety devices include a safety rod to prevent incorrect handling; emergency button and a knee pedal to stop the machine operation.

* Handy spray and air apparatus provided, thus the rollers as well as the dye trough can comfortably be rinsed, cleaned and dried.

* Together with our laboratory Mini-Dyer, Mini-Tenter, or laboratory steamer, they form an ideal combination for your laboratory.

* Air compressor can be supplied on request

Tập tin PDF:

Tập tin PDF:

Sản phẩm cùng loại

Hãng sx: RAPID (Labortex)

Dòng nhiệt kế phòng thí nghiệm với vùng hồng ngoại thích hợp để tạo công thức thuốc nhuộm và cho công việc nghiên cứu.
Liên hệ

Hãng sx: RAPID (Labortex)

Máy nhiệt luyện phòng thí nghiệm model PT-V là máy nhuộm liên tục phòng thí nghiệm loại vải Guide Cloth. Thích hợp cho vải chạy dài.
Liên hệ

Hãng sx: RAPID (Labortex)

Horizontal type model P-BO is suitable for all dyeing, printing, finishing, padding processes. Floor model, basic design as vertical type model P-AO.
Liên hệ

Hãng sx: RAPID (Labortex)

The basic principle is to have a continuous type laboratory machine which exactly has the same characteristics like a production STENTER machine to replicate testing results, suitable for drying, thermosoling and curing samples. P-TENTER consists of the following parts: - 1 pair of vertical type pneumatic mangle, model P-A1 - 1 hot-air dryer with pin-chain transportation system, model MINI-TENTER - 1 fabric pin-up device
Liên hệ

Hãng sx: RAPID (Labortex)

The basic principle of PMT-350 machine was to have a laboratory machine which has exactly the same possibilities and characteristics like a production STENTER machine. PMT-350 is a continuous operation apparatus suitable for drying, curing, continuous dyeing of sample.
Liên hệ

MSP

Hãng sx: RAPID (Labortex)

Model MSP, hoạt động liên tục để hấp vải in hoặc sau khi xử lý vải nhuộm trong hơi nước bão hòa lên đến 102℃±2℃. * Tất cả đều làm bằng thép không gỉ * Kích thước mẫu: Rộng tối đa 300mm (model MSP-300) Rộng tối đa 600mm (model MSP-600) Không giới hạn chiều dài. * Thời gian lưu trong buồng hơi: 3-18 phút (tốc độ khác theo yêu cầu) * Tùy chọn hơi nước nhiệt độ cao trong buồng bằng bộ điều khiển nhiệt độ và thiết kế gia nhiệt bằng điện.
Liên hệ

Hãng sx: RAPID (Labortex)

ROBOT DOSER là hệ thống định lượng phòng thí nghiệm thiết kế không ống để có độ chính xác tối ưu trong quá trình chuẩn bị bể nhuộm.
Liên hệ

Hãng sx: RAPID (Labortex)

AUSTOCK Pro replaces traditional labor intensive method of preparing stock solution standards. At the time of solution making, there is no need to add a specified amount of dyestuff, AUSTOCK Pro can automatically adjust the total solution volume according to the amount of dye added to achieve the correct concentration. As AUSTOCK PRO is computer controlled, the degree of accuracy achieved is without parallel.
Liên hệ

Hãng sx: RAPID (Labortex)

"TỦ NHUỘM", thiết kế dạng sàn có ngăn kéo tích hợp, được sử dụng để lưu trữ tất cả các loại thuốc nhuộm trong phòng thí nghiệm. có thể kết hợp với "Hệ thống định lượng phòng thí nghiệm, EZ DOSER" của chúng tôi để tránh người vận hành lấy nhầm thuốc nhuộm khi pha chế dung dịch gốc.
Liên hệ

Hãng sx: RAPID (Labortex)

EZ DOSER (thiết kế ba trong một), hệ thống định lượng phòng thí nghiệm mới nhất, nguyên lý hoạt động của việc phân phối công thức dựa trên phép đo thể tích bằng cách sử dụng một ống nhỏ giọt robot tiên tiến, bên cạnh việc phân phối công thức, sản phẩm này còn tích hợp với hệ thống pha chế và khuấy dung dịch gốc, mỗi chức năng có thể hoạt động độc lập và chính xác. EZ DOSER là một thiết bị không thể thiếu trong phòng thí nghiệm nhuộm để tăng khả năng tái tạo của nhuộm số lượng lớn.
Liên hệ